Refrigerator Repair Service FAQ's

There could be some reasons why your refrigerator is not operating correctly. It could be as simple as needing a new light bulb or as complex as needing a new compressor. However, the most common tell-tale signs will help you determine the source of your problem.

Is it plugged in? Make sure your appliance is switched in and turned on. If it is, and you still aren't getting any power, there might be something wrong with the switch on the appliance. This can be easily solved by replacing the switch. To do this, begin by unplugging the device. Next, remove the door panel (hold the door closed before releasing it, so you don't lose any cooling air inside). Next, remove the screws from the backplate and pull out the switches. After that, check if power is being delivered to each switch when it is pressed in using a voltmeter. If one of the switches doesn't have power when pressed in, that switch needs to be replaced.

Is there ice buildup? As water freezes in your freezer, it expands, causing pressure to build up inside. If this pressure becomes too great for your freezer's seal to hold back, then ice will start building up around your freezer walls and potentially leak out. So defrost this ice buildup, and everything will be alright.

If you own a home refrigerator that's 20 or more years old, chances are it's time to replace it. That doesn't mean giving up on your old fridge, though. Today's refrigerators are designed to be repaired and refurbished if necessary. And you'll also save money in the long run by repairing rather than replacing your refrigerator.

You can repair your fridge yourself with parts purchased from an appliance parts supplier or through an online retailer. Conversely, if you're not up for the challenge, hire a professional service technician who can help restore your refrigerator to working order. Either way, it will help you save money over replacing it with a newer model.

Here are some steps on how to prepare your refrigerator for repairing:

Step 1: Turn off the main power switch to the refrigerator and unplug the unit. This is crucial to prevent an electrical shock while working on your refrigerator.

Step 2: Drain all the water or ice in your water dispenser and ice cube maker.

Step 3: Remove any shelves or drawers located inside the refrigerator.

Step 4: Remove the back panel inside your appliance by unscrewing any screws that may be holding it in place.

Step 5: Unscrew and remove the door hinges by unscrewing them by hand or using a screwdriver, depending on how they were installed. If you have a screwdriver, you can use it to remove the door hinges so you can lift the door out of its place easier.

Step 6: Set aside all of the parts inside your refrigerator. This way you can keep track of them as you work on your appliance throughout the repair process.

Step 7: Check for rust, corrosion, and dirt that might be inside of your appliance and clean it if necessary before continuing with further repairs.